Fuz Hackerspace

User Tools

Site Tools

You are here: start » projets » fuz » webduino
projets:fuz:webduino

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
projets:fuz:webduino [2020-05-10 22:14] – [OTA] +link to http://www.csshl.net/content/esp8266-aggiornamenti-ota Lomanicprojets:fuz:webduino [2023-02-02 22:06] (current) – external edit 127.0.0.1
Line 3: Line 3:
 <WRAP round box 60%> <WRAP round box 60%>
 ===== Goals ===== ===== Goals =====
-  * [OK] Flash Webduino with different IDEs+  * [OK] Flash Webduino Smart with different IDEs
   * [OK] Check Components : pins, photocell, RGB LED, button   * [OK] Check Components : pins, photocell, RGB LED, button
   * [OK?] Use OTA   * [OK?] Use OTA
Line 11: Line 11:
  
   * [[https://webduino.io/en/tutorials/smart-01-information.html|Official Intro]]   * [[https://webduino.io/en/tutorials/smart-01-information.html|Official Intro]]
-  * Webduino USB port is only used to power the board, not for upload and monitoring+  * Webduino Smart USB port is only used to power the board, not for upload and monitoring
   * The chip is labeled ESP8266MOD by AI Thinker, in fact it is an ESP-12F, same as Wemos D1   * The chip is labeled ESP8266MOD by AI Thinker, in fact it is an ESP-12F, same as Wemos D1
   * The board includes a photocell, an RGB led and a button.   * The board includes a photocell, an RGB led and a button.
-  * [[https://www.programmersought.com/article/1565534775/|Unofficial tutorial in ~english]], with how to flash webduino with FTDI+  * [[https://www.programmersought.com/article/1565534775/|Unofficial tutorial in ~english]], with how to flash Webduino Smart with FTDI 
 +  * The Webduino Smart is extremely similar to the "[[https://vimalb.github.io/IoT-ESP8266-Starter/Witty/info.html|(Gizwits) Witty Cloud]]" board, one is probably a clone of the other (same pin number for on-board components). The Witty Cloud board includes an FTDI daughter board which simplifies development, this daughter board may even be compatible with the Webduino Smart.
  
  
 ===== Wiring and flashing ===== ===== Wiring and flashing =====
  
-Plug Webduino Smart using FTDI **3.3v** module. Webduino and the FTDI must be powered. Webduino is powered through its micro USB port.+Plug the Webduino Smart using an FTDI **3.3v** module. The Webduino Smart and the FTDI must be powered. The Webduino Smart is powered through its micro USB port.
  
            Tx     Rx                Tx     Rx    
Line 35: Line 36:
   - Power the FTDI and the Webduino   - Power the FTDI and the Webduino
   - (RGB goes light blue) Disconnect GPIO 0   - (RGB goes light blue) Disconnect GPIO 0
-  - Upload sketch... Webduino should restart in normal mode. +  - Upload sketch... Webduino Smart should restart in normal mode. 
-  - Or disconnect GPIO 0 and restart using RST or Webduino power+  - Or disconnect GPIO 0 and restart using RST or Webduino Smart power
  
 ===== Arduino IDE ===== ===== Arduino IDE =====
Line 161: Line 162:
 See https://github.com/esp8266/Arduino/tree/master/libraries/ArduinoOTA/examples See https://github.com/esp8266/Arduino/tree/master/libraries/ArduinoOTA/examples
  
-This was randomly working for me, laybe implement [[http://www.csshl.net/content/esp8266-aggiornamenti-ota|this workaround]]?+This was randomly working for me, maybe implement [[http://www.csshl.net/content/esp8266-aggiornamenti-ota|this workaround]]?
projets/fuz/webduino.1589148848.txt.gz · Last modified: 2023-02-02 22:06 (external edit)