Differences

This shows you the differences between two versions of the page.

--- projets:fuz:presence_button [2020-02-02 23:49] – [Current status] Lomanic
+++ projets:fuz:presence_button [2020-05-10 21:50] – [Software] git mirror @ git.interhacker.space Lomanic
@@ Line 18: / Line 18: @@
 You can also use ''screen /dev/ttyUSB0 115200'' to watch the serial monitor, but Arduino IDE serial monitor is more practical to use as it is relaunched each time it detects when the USB/serial adapter is plugged to a running chip.
-Using a FTDI as below is more practical as it's able to properly power the Sonoff S20. **Don't forget to set the jumper to 3.3V or you will fry the ESP**.
+Using a FTDI as below is more practical and safer as it's able to properly power the Sonoff S20. **Don't forget to set the jumper to 3.3V or you will fry the ESP**.
 {{:projets:fuz:presence_button:sonoff_s20_ftdi_pinout.jpg?200|}}
@@ Line 26: / Line 26: @@
 See [[https://github.com/Lomanic/presence-button|Lomanic/presence-button]] on Github.
-See [[https://glitch.com/edit/#!/presence-button|presence-button project]] on glitch.com for the remote server part.
+See [[https://glitch.com/edit/#!/presence-button|presence-button project]] on glitch.com for the remote server part ([[https://git.interhacker.space/Lomanic/presence-button-web|sourcecode mirror]]).
 ===== Roadmap =====
   - make the LED blink (GPIO 13 is the green LED, **not 12** as it's the relay and blue LED)